The Airbrush Garage
The Airbrush Garage
  • Видео 138
  • Просмотров 1 313 367
How to Stop getting Bubbles In your Airbrush Cup
How to Stop getting Bubbles In your Airbrush Cup. It can be frustrating when you are getting bubbles in your airbrush cup and you don't know why. I have a few tips that might help. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and error. I also want to help you make some "Do It Yourself" accessories for around your Airbrush shop to make your project easier and save some money.
As an Amazon Associate I earn from qualifying purchases.
Web Site: theairbrushgarage.com
Iwata Eclipse: amzn.to/47vFM...
Просмотров: 4 206

Видео

Gravity Fed Airbrush Color Changes
Просмотров 2,2 тыс.7 месяцев назад
Gravity Fed Airbrush Color Changes. I show you my method of how I change colors and take a look at the tools I use to do it. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and error. I also want t...
Beginner Airbrush - Paint your First Skull
Просмотров 6 тыс.8 месяцев назад
Beginner Airbrush - Paint your First Skull. I show you how to use a paper template and the different airbrush techniques to achieve a 3D look. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and er...
Having Trouble Cutting 7 Mil Mylar Stencils with your Cricut?
Просмотров 6 тыс.9 месяцев назад
Having Trouble Cutting 7 Mil Mylar Stencils with your Cricut? If all your settings are right and it still isn't cutting all the way through or only in some spots, try this simple trick. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avo...
Airbrushing and Mistakes! Don't Panic! Just fix it!
Просмотров 2,9 тыс.9 месяцев назад
Airbrushing and Mistakes! Don't Panic! Just fix it! I take a look at not only the original mistake that I made on this piece but the mistakes I made trying to fix this piece and how I overcame them. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by h...
Use your Airbrush Techniques to paint Your Favorite Album Cover
Просмотров 2,7 тыс.10 месяцев назад
Use your Airbrush Techniques to paint Your Favorite Album Cover. This project covers a large array of Airbrush Techniques. Everything from beginner to advanced, no matter your skill level there is something in here for everyone. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed...
How to Draw and Airbrush a Checkered Flag
Просмотров 2,1 тыс.10 месяцев назад
How to Draw and Airbrush a Checkered Flag. I show you some basic techniques of drawing and laying out a checkered flag and then I show you my approach on how I airbrush it. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistak...
Cleaning your Airbrush - How To
Просмотров 2,3 тыс.10 месяцев назад
Cleaning your Airbrush - How To. I show you how I clean, and how often I clean my airbrush based on what type of paint I am using. I also take a look at the tool I use and some tricks I learned along the way. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning pr...
Airbrush Gaahleri GHAC-98D Review
Просмотров 3,3 тыс.11 месяцев назад
Airbrush Gaahleri GHAC-98D Review. I put this brush to the test by using it for a good week or so so I can bring you a hands on review. I break it down and take a look at all the aspects of the brush and then give you what I think are the Pros and the Cons. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It...
American Flag #shorts
Просмотров 185Год назад
American Flag #shorts - Check out my full channel The Airbrush Garage. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and error. I also want to help you make some "Do It Yourself" accessories for around your Airbrush shop to make your project easier and save some money. As an...
Blair School of Realism Classroom In A Box Review
Просмотров 2 тыс.Год назад
Blair School of Realism Classroom In A Box Review. I take a look at 3 Classroom In A Box kits that I worked through and share my experience and then show you my results. I also touch upon my visit to the school. You are never to good to learn something new! Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It...
Airbrushing a Catchers Mask
Просмотров 1,9 тыс.Год назад
Airbrushing a Catchers Mask. I go over prepping, masking, how to fix mistakes and much more. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and error. I also want to help you make some "Do It Your...
3D Printed Airbrush Accessories
Просмотров 1,2 тыс.Год назад
3D Printed Airbrush Accessories. Designed by The Airbrush Garage, these accessories are available to you via a 3D .stl file for you to print yourself or have a print shop or a friend do it for you. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by ha...
Lets Roll! Airbrushing a Flag
Просмотров 1,2 тыс.Год назад
Lets Roll! Airbrushing a Flag. I show you the basic techniques of how to make a flag roll and take it from 2D to 3D. Check out my Amazon Affiliate links below for the products I use in this video. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and error. I also want to help y...
Airbrush Control Basics
Просмотров 2,1 тыс.Год назад
Airbrush Control Basics
Airbrush Videos - Good or Bad for Beginners?
Просмотров 1,4 тыс.Год назад
Airbrush Videos - Good or Bad for Beginners?
Getting Paint to Flow Through your Airbrush for Beginners
Просмотров 28 тыс.Год назад
Getting Paint to Flow Through your Airbrush for Beginners
Airbrush Shading Basics
Просмотров 6 тыс.Год назад
Airbrush Shading Basics
Rechargeable Electric Eraser Unboxing and Review
Просмотров 1,5 тыс.Год назад
Rechargeable Electric Eraser Unboxing and Review
Beginner Airbrush - Applying the Basics
Просмотров 8 тыс.Год назад
Beginner Airbrush - Applying the Basics
The Airbrush Garage Store Tab & Channel Tour
Просмотров 348Год назад
The Airbrush Garage Store Tab & Channel Tour
Airbrush the American Flag with an Eagle - Part 2
Просмотров 1,9 тыс.Год назад
Airbrush the American Flag with an Eagle - Part 2
Airbrush the American Flag with an Eagle - Part 1
Просмотров 1,3 тыс.Год назад
Airbrush the American Flag with an Eagle - Part 1
How To Hook Up your Airbrush to a Compressor
Просмотров 13 тыс.Год назад
How To Hook Up your Airbrush to a Compressor
How to make a Multi Layer Stencil in Cricut Design Space
Просмотров 10 тыс.Год назад
How to make a Multi Layer Stencil in Cricut Design Space
10, 000 Subscriber Giveaway Winner Announcement!
Просмотров 385Год назад
10, 000 Subscriber Giveaway Winner Announcement!
Paasche TG Talon Airbrush Unboxing and Review
Просмотров 7 тыс.Год назад
Paasche TG Talon Airbrush Unboxing and Review
Createx Airbrush Reducer Update! Reviewed & Explained
Просмотров 7 тыс.Год назад
Createx Airbrush Reducer Update! Reviewed & Explained
Airbrush Stencil Basics - The Positive and The Negative
Просмотров 15 тыс.Год назад
Airbrush Stencil Basics - The Positive and The Negative
Easy Crystalized Paint Effect and Candy 2o - How To
Просмотров 2,7 тыс.Год назад
Easy Crystalized Paint Effect and Candy 2o - How To

Комментарии

  • @RONAKAWEED
    @RONAKAWEED 19 часов назад

    Do you mean polyurethane?

  • @eugenegriess1896
    @eugenegriess1896 2 дня назад

    Thank you for this video. I never thought about leaving the air flow on so it blew extra paint off of the tip. That was very helpful Also the amount of reducer to use. I wasn't using enough of it. Best video I've seen about this.

  • @christikim2660
    @christikim2660 2 дня назад

    youtube university strikes again! thank you

  • @mikejimenez1518
    @mikejimenez1518 3 дня назад

    Thanks man! Now I don’t feel so alone! 🙃 Great video!

  • @777SMKsimpkymykniche
    @777SMKsimpkymykniche 9 дней назад

    Thank you for the help

  • @NalzEmpire
    @NalzEmpire 9 дней назад

    Wow it's worked again, Thankyou so much!

    • @TheAirbrushGarage
      @TheAirbrushGarage 6 дней назад

      Nalz, I am glad you liked the video. Thanks for the comment, and thanks for watching.

  • @ripkobexnip3719
    @ripkobexnip3719 10 дней назад

    Is the editing software free ?

    • @TheAirbrushGarage
      @TheAirbrushGarage 9 дней назад

      Rip, there is a paid version, but I only use the free one. Thanks for the question, and thanks for watching.

  • @ripkobexnip3719
    @ripkobexnip3719 10 дней назад

    I’m looking to buy a circuit machine I’m new to all This Wich machine u guys recommend ?

  • @thecentralscrutinizerr
    @thecentralscrutinizerr 12 дней назад

    Going to the School of Realism this Fall for two weeks, taking two courses back to back. Also got Dru's Custom Micron Takumi airbrush with the "hair trigger" mod.

    • @TheAirbrushGarage
      @TheAirbrushGarage 12 дней назад

      CS, I was down there a couple of years ago. I had a great experience. Dru and the staff were great and of course I learned a lot. I would like to visit again when life allows. Oh, and I bout my Micron Takumi with the soft spring and trigger from Dru when I was there. It's my favorite brush. Have a great time.

  • @ronnyrock1977
    @ronnyrock1977 14 дней назад

    wonderful channel!!

  • @x13roger80
    @x13roger80 14 дней назад

    Love to see how you use the moss green with this system

  • @AndrewMurphy8383
    @AndrewMurphy8383 15 дней назад

    I wish you show how you made the stencils to get the neg and pos on the cricut design space

    • @TheAirbrushGarage
      @TheAirbrushGarage 14 дней назад

      Andrew, I purchased this stencil online, I see it is no longer available, but I do have a video on the channel that shows how to layer in Design Space. Check it out if you get a chance. Thanks for watching.

  • @drydreams8513
    @drydreams8513 16 дней назад

    I’m running a framing gun with it and it works fine I was worried about it not handling it but now everybody is jealous and boiling with hate and envy at work.they laughed at me the first day I showed up with it pointing at it and at me saying I was a fool but they have nothing to say now days

    • @TheAirbrushGarage
      @TheAirbrushGarage 14 дней назад

      Cool! I'm glad you like it. Thanks for dropping me a comment, and thanks for watching.

  • @bartslaman
    @bartslaman 19 дней назад

    Wow this really helped me a lot and I now can get things done! Thanks

    • @TheAirbrushGarage
      @TheAirbrushGarage 19 дней назад

      Harry, I am glad you liked the video. Thanks for the comment, and thanks for watching.

  • @tomgrantham9992
    @tomgrantham9992 20 дней назад

    Great explanation. Thank you for sharing your experience. I am interested in making siloettes of different animals.

    • @TheAirbrushGarage
      @TheAirbrushGarage 19 дней назад

      Tom, this machine is perfect for that. Thanks for the comment, and thanks for watching.

  • @CozzyKorner
    @CozzyKorner 20 дней назад

    Thank you 🙏🏻

  • @tucsonairbrush3233
    @tucsonairbrush3233 20 дней назад

    I use Fantastik cleaner cut with tap water 70% water in a spray bottle. This works great for clean up (and thins decently, too) with all my Createx paints. Saves me shit-ton of $.

    • @TheAirbrushGarage
      @TheAirbrushGarage 19 дней назад

      Tucson, I do not subscribe to the homemade concoctions, but if you like it and it works for you, that's all that matters. Thanks for the comment, and thanks for watching.

  • @mrbsbeesntees7081
    @mrbsbeesntees7081 21 день назад

    thanks for the class , have u done a Canadian flag ? if so would love to see it

    • @TheAirbrushGarage
      @TheAirbrushGarage 20 дней назад

      Mr. B. I have not, but I will. Thanks for the Idea.

  • @tonywampler217
    @tonywampler217 21 день назад

    I been making music when I was 5 years old

  • @scottpendleton6591
    @scottpendleton6591 21 день назад

    Yknow I've looked at the 4011 thinner and I'm not sure the numerous on the cleaner and they're both exactly the same as far as what they're made of , don't know if they have any ingredients not listed but what they do list are the same even the same ratio of the listed ingredients...they are also differently priced.....what gives? I just buy whatever of the two is cheaper , whether it's reducer or clnr.

    • @TheAirbrushGarage
      @TheAirbrushGarage 20 дней назад

      Scott, I have never used the cleaner. I use the 4011 as my reducer and cleaner. The 4011 is compatible with all of the createx paints. Just stick with that and forget the rest. Keep it simple. Thanks for the question, and thanks for watching.

  • @deputy3690
    @deputy3690 21 день назад

    I totally agree about the pros and cons.

    • @TheAirbrushGarage
      @TheAirbrushGarage 21 день назад

      Thanks for the comment, Deputy, and thanks for watching.

    • @deputy3690
      @deputy3690 21 день назад

      @TheAirbrushGarage The needle and nozzle not being marked is off the charts frustrating. Even an empty tube marked with the different needle/nozzle sets would help simplify matters. Hopefully Gaalheri can solve this issue quickly.

  • @tsktsk75
    @tsktsk75 23 дня назад

    My cricuit "freezes" part way through cutting. I've tried troubleshooting several times, but won't work. (flashing red button) getting so frustrated! Is my machine too old? Any suggestions? Thanks!

    • @TheAirbrushGarage
      @TheAirbrushGarage 22 дня назад

      T5, I have never experienced that. I would reack out to Cricut directly. Sorry I couldn't be of more help.

  • @ksaweryglab
    @ksaweryglab 24 дня назад

    your videos are brilliant - as an airbrush beginner (and bubbles in the cup is what I experience almost every time I start a session) it is really helping me out.

    • @TheAirbrushGarage
      @TheAirbrushGarage 23 дня назад

      KG, I am glad you are enjoying the channel. Thanks for dropping me a comment, and thanks for watching.

  • @thecentralscrutinizerr
    @thecentralscrutinizerr 24 дня назад

    Yes it does have a shelf life I don't care what he says. If you let it set for years, in my case 8 years, without using it, it becomes unusable. If you want to extend the shelf life, you can shake the paint to keep it mixed in the bottle. I bought a paint shaker from Amazon for airbrush paint. Every 3 months, I shake every bottle that I haven't used. Never buy more paint than you actually use, and remember, mixing paint can be done with 3 colors.

    • @TheAirbrushGarage
      @TheAirbrushGarage 24 дня назад

      CS, shaking the paint sounds like solid advice. Thanks for sharing. I appreciate the comment, and thanks for watching.

  • @ThinkTankIllustration
    @ThinkTankIllustration 25 дней назад

    big help thanks

  • @WalkerWs4848
    @WalkerWs4848 25 дней назад

    What did you do to those shin guards?

    • @TheAirbrushGarage
      @TheAirbrushGarage 24 дня назад

      Very observant William. I actually wound up not painting them.

  • @bobbond8232
    @bobbond8232 26 дней назад

    This video was very helpful! However, I would have loved a comparison with the Createx textile paints as well.

    • @TheAirbrushGarage
      @TheAirbrushGarage 24 дня назад

      Mario, I am glad to hear you liked the video. However, I can't speak on the textile paints as I have never used them. It's just not the type of airbrush I do. Thanks for the comment, and thanks for watching.

  • @bobjohns2471
    @bobjohns2471 28 дней назад

    Great information and great video. Thank you for sharing!

  • @bobjohns2471
    @bobjohns2471 29 дней назад

    Hi Dan, Thank you for your very informative videos, they have helped me immensely. I am brand new to airbrush painting and currently just paint stencils of American flag, we the people, etc. I have the Passche Talon TG that came with the fan nozzle. Can you suggest what size tip would be best for my application and any information on using the fan nozzle? Thank you in advance, Bob Johns

    • @TheAirbrushGarage
      @TheAirbrushGarage 23 дня назад

      Bob, I'm sorry for the delayed response, I thought I had responded to you. I think a .3 or .35 needle is perfect for that type of work. I don't really see the need for the fan tip unless i am flooding in a larger background. I hope this helps, and thanks for watching.

  • @rachelm2692
    @rachelm2692 Месяц назад

    I've only ever cut vinyl with my Silhouette, so my blades stay good for a long time. How much wear and tear does the mylar do to the blades?

    • @TheAirbrushGarage
      @TheAirbrushGarage 29 дней назад

      Rachel, I am not sure of the exact ware and tear, but my blades last a very long time. Thanks for the question, and thanks for watching.

  • @cbaesemanai
    @cbaesemanai Месяц назад

    Enjoying the video, I airbrushed for a good decade but was stuck workingo n black or dark backgrounds. I am trying to expand my skill to white background as its a completely different approach.

    • @TheAirbrushGarage
      @TheAirbrushGarage 29 дней назад

      CB, I am glad you are enjoying the video. Thanks for dropping me a comment, and thanks for watching.

  • @user-ix5rd8lg3m
    @user-ix5rd8lg3m Месяц назад

    I love your videos ,as a beginner and I HAVE WATCHED 1000 of airbrush videos ,you are number 1 ,cheers from Australia

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Thank you, Belle. I am glad you are enjoying the channel. Thanks for watching.

  • @ainttakenanyshit
    @ainttakenanyshit Месяц назад

    I could only watch the first few minutes.... Whatever airbrush "smarts" you may posses, your spraying with fairly good looking artwork just behind the easel, undoubtedly being hit with over spray, nullifies any "goodness" that this video may have tried to convey...."Skills", maybe, "Common sense", not a lick................

  • @PhunkyMunk
    @PhunkyMunk Месяц назад

    Great review!

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Thanks, Jesus. I appreciate the feedback, and thanks for watching.

  • @vipersniper843
    @vipersniper843 Месяц назад

    Thanks for the video. Was thinking to help you crease the cardboard for your filter.Maybe use a pizza cutter to crease cardboard first with straight edge then fold over your level.

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Viper, that is a really good idea. Thanks for sharing that, and thanks for watching.

  • @th.981
    @th.981 Месяц назад

    3 June 24 bought my 1 gal compressor Fortress ultra quiet and it is. It's for small jobs but I was amazed on how quiet it is. It runs well and refills quick.

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Thanks for the comment, TH. I appreciate it, and thanks for watching.

  • @trevormolyneux560
    @trevormolyneux560 Месяц назад

    It’s 0.7 mm not 7mm

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Trevor. mm and mils are not the same. A mil is measured in thousands of an inch (.001") things such as paper and paint thickness are measured in mils.

  • @pansim87
    @pansim87 Месяц назад

    Thank you so much.Greetings from Greece.

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      PS, I am glad you are enjoying the channel. Greece! I love it!. My grandparents are from Italy 🇮🇹 and my last name is Cuccurullo, can't much more italian than that. Lol 100%. Thanks for dropping me a comment, and thanks for watching.

  • @robertmcklveen8313
    @robertmcklveen8313 Месяц назад

    Thanks, I'm going to put flames on my Honda Accord coupe

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Good luck with the Flames Robert. Thanks for dropping me a comment, and thanks for watching.

  • @gadgetfellow
    @gadgetfellow Месяц назад

    thank you

  • @TheAirbrushGarage
    @TheAirbrushGarage Месяц назад

    Cool. Congrats to your son. If he makes a career out of it, he will be retired before he's 50! Good for him.

  • @ELPADREAIRBRUSH
    @ELPADREAIRBRUSH Месяц назад

    Hey Dan it’s Marc hope the family and you are doing awesome!! I have a question and I don’t trust no one but you !!!!! I see these videos about using spray paint out of the can putting it into a bottle and using it in your airbrush I’m so gun shy I LOVE MY CUSTOM MICRON AND MY IWATA TAKUMI if I ruin these my wife will shoot me with my own gun and then ask me to reload and shoot me more !! and I just wanted to know have you ever used this technique and does it cause risk to your O rings or your nozzles ? Thanks a million buddy hope to hear from you soon Sincerely Marc ( EL PADRE AIRBRUSH )

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      EPA, I have never done that. It won't cause any damage to the brush, and the needle packing is solvent resistant. As long as you clean the brush before it dries in the gun, it should be fine. I would just prefer to use my Createx. Lol

    • @ELPADREAIRBRUSH
      @ELPADREAIRBRUSH Месяц назад

      @@TheAirbrushGarage me to my friend the only way I would use this method is if I ran out of a color and I was doing something for a client so yeah I’ll just stick with my cretex paints also thanks a million Dan hope you and yours have a great summer and a AWSOME forth of July ! My son graduated and enlisted for 6 yrs in the Air Force he leaves august 12 so moms babying him so thanks again and can’t wait till new videos come out how about a video on tru fire ? Thank buddy Marc

  • @thecentralscrutinizerr
    @thecentralscrutinizerr Месяц назад

    What's the actual shelf life of Createx paint? I just tested an unopened 8 year old bottle of Createx Transparent and Illustration colors through a brand new Iwata airbrush. It did not end well. This is paint that sat on the shelf, was never opened, never shook up except right before putting in the airbrush, for 8 years. So I know for a fact its less than 8 years. But I wonder what the actual shelf life is.

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      CF. I have had paint, sit longer than that, and used it with no issue and I have had paint that sat less than that, and it got thick and clumpy. I have had paint stored in a garage, and when I lived in PA it was exposed to freezing temps and some of the paint went bad and some didn't. So I'm not sure what the answer is, but if you reach out to Createx, they should take care of it. Thanks for the question, and thanks for watching.

  • @yaelnir1258
    @yaelnir1258 Месяц назад

    Thank you so much for this information, I was going to buy other blades since my machine didn’t cut through the mylar i have. Now i kniw to test it first like you showed

  • @AdamBuckmantechpad1642
    @AdamBuckmantechpad1642 Месяц назад

    if i were to turn the motor on and use it as a air duster for cleaning a pc how long will it give me air for

  • @shanesayer1795
    @shanesayer1795 Месяц назад

    very helpful will be using your info b

  • @doofwop
    @doofwop Месяц назад

    The other brush you talk about with the siphon cup can be used with a gravity cup so that's a nonissue. Just buy a gravity side feed cup for it problem solved, you don't have to buy the Takumi. Also a higher trigger gives more leverage for finer control. You swapped it for a lower trigger which will give you less control. I'm using a 40 year old HP-SB with the Takumi gravity side cup adapter and a 2ml Harder & Steenbeck threaded cup on it. I'm also using the Takumi trigger with it. All of these parts are interchangeable. CM Takumis are too expensive especially when they are basically the older brushes with added features nobody uses. Older HPs go for less than $100 on eBay and they are fantastic well made brushes with proper o-ring needle packing for the utmost feel. Airbrush tech has not changed in 100 years

  • @mynameisprivate158
    @mynameisprivate158 Месяц назад

    You gotta learn RUclips code when you watch videos, he said this video is not sponsored. What I hear is Wicked paints isn't directly paying a fee for this video not that they aren't providing free materials or other free perks to encourage him to sell Wicked products!! You always have to listen for what isn't said in videos as much as what is said!!!

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      MIP. I can appreciate your negativity, but I have used Createx paints for over 20 years before I started making videos. Steve Driscol was an awesome airbrush artist, and his skin tone is still the best and easiest that I have seen to use. It's kind of a shame that's what you got from the video. I make videos because I like to reach and help others. Thanks for watching, though.

  • @christopherbrown5338
    @christopherbrown5338 Месяц назад

    They have a 1mm as well and you can put a fan cap on that (T-227-4 & TAF-4). I know most will cringe, but I unscrewed the trigger stop adjustment screw and took a pair of pliers and gently grip the thread perpendical on the thread and then test the screw fit. I did this because I don't like how loose it is and by lightly damaging the thread gives just enough resistance that the screw will stay where you set it.

  • @johnnyrepine937
    @johnnyrepine937 Месяц назад

    It's my first time here on your channel. I enjoyed your candor and how comprehensively you covered the topic. I'm still a novice with the airbrush, which I use for miniatures painting. Last night I got some water spraying after a decent session of putting blue on a few dozen models, which made me realize that I hadn't put a moisture trap on this gun, yet. Oops

    • @TheAirbrushGarage
      @TheAirbrushGarage Месяц назад

      Yeah, if you have a compressor that gets hot, it will create moisture. You definitely want a water trap, and they are inexpensive. Thanks for the comment, and thanks for watching.